ADT® Authorized Dealer Serving Rochester, NY & Surrounding Areas
ADT smoke detector in a Rochester family room
May 24, 2021

Monitored Fire Alarms Vs Smoke Detectors In Rochester

The National Fire Protection Agency recommends a smoke detector.  At a minimum, your house should have a smoke detector in every bedroom, the hall leading to sleeping quarters, and on every story of the house (even the basement). But, should you just install an ordinary smoke detector, or should you pick out for a more advanced monitored fire alarm? Looking at the Rochester monitored fire alarm vs smoke detector decision, you will easily see why one device is a clear choice.

Typical Smoke Detectors Only Sense Smoke

True to their name, typical smoke detectors only trigger when they sense an ample amount of smoke. Then they go off -- usually with a loud beeping -- until you re-arm the device. Of course, that won’t necessarily do much good if nobody’s home to hear the siren.

Ideally, you should install multi-sensor smoke detectors that are responsive for both smoke from both flaming and smoldering remains. It’s advised to pair your components so every alarm goes off at the same time. This way, you can know if there's a fire from upstairs, even if it occurs from a spark in the basement.

Monitored Fire Alarms Notify You To Fire When You Are Home Or Anywhere

A monitored fire alarm appears and hangs the same way as your ordinary smoke detector. If they sense fire conditions within the home, they'll create a incredibly loud tone. However, there's a myriad of things that your monitored fire alarms are going to do that your smoke detectors cannot.

First, advanced sensors will watch for rising hot air levels in addition to different kinds of smoke. When they detect flames, they'll alert a monitoring team as well as ring the high-volume alarm. That allows you to concentrate on getting out of the house as your monitoring team sends the fire department. And because your monitoring team is on alert 24/7, your alarms never fail to notify help no matter where you are.

Monitored fire alarms typically hook into your Rochester home security system. Other equipment paired to the same system can be told to activate when your fire alarms spring into action. For example, your linked thermostat can instinctively turn on the vent fan, which should help prevent flame spread. Or have your whole house jump into motion when the lights come on, your doors unlatch, and your security alarms neutralize. You can even have your system issue your mobile device a message to know that your home's in peril when you're out of town.

ADT monitored heat detector in Rochester 

The Verdict Of Monitored Fire Alarms Vs. Smoke Detectors in Rochester

It's pretty easy to determine what wins in a straight match-up between monitored fire alarms and smoke detectors. You just get so much more with a monitored fire alarm.

Ordinary Smoke Detectors:

● Triggers high-decibel alarm when the device senses excessive amounts of smoke

Monitored Fire Alarms

● Triggers high-decibel alarm when the component finds ample of smoke

● PLUS can sense high heat

● PLUS pairs with your ADT home security system

● PLUS contacts a 24/7 monitoring center which will send emergency personnel

● PLUS sends you a notification to your mobile device

Get Monitored Fire Alarms In Your Rochester Security System

To obtain the most from your monitored fire alarms, like them to a cutting-edge security system, like ADT. Luckily, Secure24 Alarm Systems can craft your ADT home security deal to incorporate fire and safety alarms. Just call (585) 310-4555 or send in the form below to start.